 |
|
Directions for Use:
- Mix 1 measured unit/pouch of Insuladd (13 dry ounces)
per 1 gallon of paint
- Volume will increase by 20%: when mixed 1 gallon =
1.2 gallons
- Mixing recommendation:
- 1 gal paint -use at least a 2 gal bucket & add
1 unit of Insuladd Additive
- 5 gal paint- pour 2-½ gal paint into a 5 gal
bucket & add 2½ units of Insuladd Additive
- Paint containing Insuladd can be applied with a brush,
roller, or sprayer
- When using a sprayer the recommended tip size is .617-.621
- The small cartridge filter for the sprayer must be
removed to avoid filtering out the additive
- If needed to thin for flow, add ½ to 1
cup of water per 1 gallon of paint
- NOTE: if paint is not water based, follow
thinning instructions on paint
- Add the Insuladd Additive gradually to your paint while
stirring to avoid clumping of the ceramic microspheres in
the additive.
- Always stir your paint for a minute or two prior to commencing
painting if the paint has been sitting for more then 2 hours
since last used.
- The optimal application for energy savings is two coats
of paint containing additive
--- Always Mix Insuladd Additive into the paint in a Larger Container than the Paint Came in
--- Insuladd Additive will add slight texture, and may slightly affect the hue of DARKER colors
- Insuladd Additive will leave a very mild dusty-feeling
texture to the surface to which it has been applied, but
will not visually affect most wall surfaces.
- Insuladd Additive may appear to lighten darker colors
one hue.
- The additive will flatten the finish of the paint one
degree
- For special finishes apply the coats with the additive
under the finish coat
- Insuladd additive is inert, and will not affect the chemical
properties of the paint in any way.
|
| |
|
|
